Plastic Granulator: How to Choose One for Injection Molding
Plastic Granulator: How to Choose One for Injection Molding
Sprues, runners, and rejected parts pile up faster than most plants expect...
Posts by ハワード
Plastic Vacuum Loader: How to Choose for Injection Molding
Plastic Vacuum Loader: How to Choose for Injection Molding
A plastic vacuum loader looks like the simplest machine in the plant. A hop...
Chiller Sizing: How to Size a Chiller for Injection Molding
Learn how to size a chiller for injection molding: the cooling load formula, a worked tonnage example, and the sizing mistakes that waste energy.
Injection Molding Automation: Guide to Going Lights-Out
How to automate an injection molding line in the right order: material handling, drying, dosing, part extraction, and going lights-out.
射出成形用の温度制御ユニット（TCU）とは何ですか？
MOLD TEMPERATURE CONTROL
What Is a Temperature Control Unit (TCU) for Injection Molding?
That little metal box on casters, plumbed ...
集中型と機械側設置型の除湿乾燥機：適切な乾燥システムの選び方
DRYING & DEHUMIDIFYING
Central vs. Machine-Side Dehumidifying Dryers: How to Choose the Right Drying System
You can dry every pre...
射出成形用冷却塔：開放式と閉鎖式の比較、容量の決定、および選定方法
COOLING & HEAT REJECTION
Cooling Tower for Injection Molding: Open vs Closed Circuit, Sizing, and How to Choose
The cooling tower...
Central Chiller for Injection Molding: How a Central Chiller Plant Saves Energy and Stabilizes Cooling
HEATING & COOLING
Central Chiller for Injection Molding: How a Central Chiller Plant Saves Energy and Stabilizes Cooling
A cent...
Smart Central Feeding System for Plastic Injection Molding: A Complete Guide
AUTOMATION & MATERIAL HANDLING
Smart Central Feeding System for Plastic Injection Molding: A Complete Guide
A central feeding s...
Industrial Water Chiller: Air-Cooled vs Water-Cooled and How to Choose
HEATING & COOLING
Industrial Water Chiller: Air-Cooled vs Water-Cooled and How to Choose
A chiller is the machine nobody thinks...